纺织学报 ›› 2021, Vol. 42 ›› Issue (05): 185-192.doi: 10.13475/j.fzxb.20200503408

• 综合述评 • 上一篇    下一篇

三维针刺技术研究进展

陈小明1,2,3, 李晨阳2,3, 李皎1,2, 谢军波1,2, 张一帆1,2, 陈利1,2()   

  1. 1.天津工业大学 纺织科学与工程学院, 天津 300387
    2.天津工业大学 先进纺织复合材料教育部重点实验室, 天津 300387
    3.天津工业大学 机械工程学院, 天津 300387
  • 收稿日期:2020-05-18 修回日期:2021-02-10 出版日期:2021-05-15 发布日期:2021-05-20
  • 通讯作者: 陈利
  • 作者简介:陈小明(1984—),男,高级实验师,博士。主要研究方向为纺织机器人装备及纺织复合材料。
  • 基金资助:
    天津市教委科研计划项目(2018ZD13)

Research progress of three-dimensional needle-punching technology

CHEN Xiaoming1,2,3, LI Chenyang2,3, LI Jiao1,2, XIE Junbo1,2, ZHANG Yifan1,2, CHEN Li1,2()   

  1. 1. School of Textile Science and Engineering, Tiangong University, Tianjin 300387, China
    2. Key Laboratory of Advanced Textile Composite Materials, Ministry of Education, Tiangong University, Tianjin 300387, China
    3. School of Mechanical Engineering, Tiangong University, Tianjin 300387, China
  • Received:2020-05-18 Revised:2021-02-10 Online:2021-05-15 Published:2021-05-20
  • Contact: CHEN Li

摘要:

三维针刺技术实现了立体织物的低成本织造,为深入了解三维针刺的自动化成型设备技术、刺针技术、三维针刺织物(或预制体)及三维针刺复合材料的研究情况,介绍了适用于异型织物的针刺自动化成型设备技术,包括回转预制体和自由曲面预制体针刺成型装备;阐述了现有的刺针刀具技术;归纳了三维针刺织物的新型织造结构,包括多组元混杂针刺织物、针刺/缝合耦合针刺织物、仿形针刺织物和梯度针刺织物;分析了三维针刺复合材料的实验表征、理论分析和数值模拟研究进展情况;最后总结了现有三维针刺技术的发展水平和面临的挑战,并对三维针刺技术的未来发展趋势进行了展望。

关键词: 三维针刺装备, 刺针, 三维针刺织物, 三维针刺复合材料, 针刺技术

Abstract:

The three-dimensional (3-D) needle punching technology leads to low-cost formation of three-dimensional fabrics. In order to better understand the research status of 3-D needle punching technology, the latest domestic and foreign research progress of 3-D needle punching automation equipment technology, 3-D needle punching fabric (or preform) and 3-D needle punching composite materials are reviewed. This review concentrates mainly on the needle punching automatic forming equipment technology suitable for special-shaped fabrics, including the needle punching forming equipment for rotating preforms and free-form surface preforms. The existing needle technology and the new structures of three-dimensional needled fabrics, including multiple component hybrid needled fabrics, needled/stitched coupled needle-punched fabrics, contoured needld fabrics and gradient needled fabrics are summarized, and the experimental characterization, theoretical analysis and numerical simulation research progress of three-dimensional needled composites are also analyzed. Finally, the current development level and challenges of 3-D needle punching technology are discussed, and the future development trend of 3-D needle punching technology is prospected.

Key words: three-dimensional needle punching equipment, needle punching, three-dimensional needle punched fabric, three-dimensional needle punched composite, needle punching technology

中图分类号: 

  • TB33

图1

回转体专用针刺成型装备"

图2

回转体柔性针刺成型装备"

图3

自由曲面针刺机器人"

图4

针刺织物3D打印机"

图5

格罗茨-贝克特刺针截面"

图6

新型三维针刺刺针"

图7

多组元混杂针刺织物"

图8

仿形针刺织物"

图9

梯度针刺织物"

[1] CHEN X, CHEN L, ZHANG C, et al. Three-dimensional needle-punching for composites: a review[J]. Composites Part A: Applied Science and Manufacturing, 2016,85:12-30.
doi: 10.1016/j.compositesa.2016.03.004
[2] OLRY P. Process for manufacturing homogeneously needled three-dimensional structures of fibrous material: US4790052[P]. 1988-12-13.
[3] 房坤鹏, 刘延友, 乔志炜, 等. 一种变直径回转体织物针刺成型设备:201710200976.7[P]. 2017-03-30.
FANG Kunpeng, LIU Yanyou, QIAO Zhiwei, et al. Variable diameter rotary fabric needle forming device: CN201710200976.7[P]. 2017-03-30.
[4] HERVE E, LE H, GARETH C, et al. Installation and a method for needling a fiber preform while controlling the contact pressure of the stripper: US20180274144A1[P]. 2018-9-27.
[5] 杨建成, 李笑, 杨建伟. 一种异形截面非织造布立体织物针刺: 201821859010.0[P]. 2019-07-09.
YANG Jiancheng, LI Xiao, YANG Jianwei. Needle punching of non-woven fabric with irregular cross-section: 201821859010.0[P]. 2019-07-09.
[6] 蒋洪亮. 一种应用于碳纤维坩埚制备的针刺机: 201921069385.1[P]. 2020-06-02.
JIANG Hongliang. A needling machine applied to the preparation of carbon fiber crucibles: 201921069385.1 [P]. 2020-06-02.
[7] 范臻, 孟健. 一种导弹壳体专用针刺机: 201821810987.3[P]. 2019-08-13.
FANG Zhen, MENG Jian. A special needling machine: 201821810987.3[P]. 2019-08-13.
[8] 陈小明, 李皎, 张一帆, 等. 回转结构预制体柔性针刺成型系统设计[J]. 纺织学报, 2020,41(11):156-161.
CHEN Xiaoming, LI Jiao, ZHANG Yifan, et al. Design of flexible needle punching system for rotary Preform[J]. Journal of Textile Research, 2020,41(11):156-161.
[9] 陈小明, 陈利, 李皎, 等. 一种双头对称回转预制体柔性针刺成形装备: 201920237620.5[P]. 2020-06-09.
CHEN Xiaoming, CHEN Li, LI Jiao, et al. A double-head symmetrical rotary prefabricated flexible needle punching: 201920237620.5 [P]. 2020-06-09.
[10] 陈小明, 陈利, 李皎, 等. 一种面向无芯模支撑的回转预制体针刺成形辅助支撑装置: 201920237262.8[P]. 2020-06-09.
CHEN Xiaoming, CHEN Li, LI Jiao, et al. Auxiliary supporting device for needle punching of rotary preform facing coreless mold support: 201920237262.8[P]. 2020-06-09.
[11] 陈小明. 异型构件预制体机器人三维针刺成形轨迹规划与针刺模拟[D]. 天津:天津工业大学, 2018: 19-45.
CHEN Xiaoming. 3D needle punching robot trajectory planning of special-shaped components and needle punching simulation[D]. Tianjin: Tiangong University, 2018: 19-45.
[12] 陈小明, 陈利, 谢军波, 等. 一种基于伺服针刺头单元的机器人针刺设备:201820208808.2[P]. 2018-11-06.
CHEN Xiaoming, CHEN Li, XIE Junbo, et al. A robotic needle-punching device based on a servo needle-punching head unit: 201820208808.2[P]. 2018-11-06.
[13] CHEN X, ZHANG Y, XIE J, et al. Robot needle-punching path planning for complex surface preforms[J]. Robotics & Computer Integrated Manufacturing, 2018,52:24-34.
[14] 陈小明, 陈利, 李皎, 等. 一种带力反馈的针刺机器人工作台: 201920237265.1[P]. 2020-06-09.
CHEN Xiaoming, CHEN Li, LI Jiao, et al. A needle punching robot workbench with force feedback: 201920237265.1[P]. 2020-06-09.
[15] 陈利, 陈小明, 张春燕, 等. 一种手提气动针刺枪: 201620357508.1[P]. 2016-10-19.
CHEN Li, CHEN Xiaoming, ZHANG Chunyan, et al. A portable pneumatic needling gun: 201620357508.1[P]. 2016-10-19.
[16] SCOTT H, PITTSBURGH P A. Systems and methods for additive manufacturing of three dimensional objects using needle felting: US10160164B2[P]. 2018-12-25.
[17] 董九志, 宋宗建, 陈云军, 等. 预制体缝合针稳定性分析及插刺机构改进设计[J]. 纺织学报, 2019,40(10):171-176.
DONG Jiuzhi, SONG Zongjian, CHEN Yunjun, et al. Stability analysis of suture needle of prefabricated parts and improvement of inserting mechanism[J]. Journal of Textile Research, 2019,40(10):171-176.
[18] 马月双, 靳向煜, 吴海波. 一种针刺机正刺刺针: 201220098694.3[P]. 2012-11-07.
MA Yueshuang, JIN Xiangyu, WU Haibo. A needle punching machine needle: 201220098694.3[P]. 2012-11-07.
[19] 陈维, 李泽华. 针刺机用刺针: 201821278900.2[P]. 2019-04-02.
CHEN Wei, LI Zehua. Needle for needle punching: 201821278900.2[P]. 2019-04-02.
[20] 周建国, 吉宏伟, 李维栋. 一种针刺机的刺针: 201320777106.3[P]. 2014-05-21.
ZHOU Jianguo, JI Hongwei, LI Weidong. Needle of a needle punching machine: 201320777106.3[P]. 2014-05-21.
[21] 卢亚芹. 一种高效的起绒针刺机的刺针结构: 201720293203.3[P]. 2017-11-03.
LU Yaqin. Needle structure of a high-efficiency pile needle: 201720293203.3[P]. 2017-11-03.
[22] 吴海波, 郭卫昂. 一种椭圆形截面非织造用刺针的试作及应用[J]. 纺织器材, 2015(5):7-10.
WU Haibo, GUO Weiang. Trial production and application of a needle with oval cross-section[J]. Textile Accessories, 2015 (5):7-10.
[23] 缪云良. 碳纤维复合金属材料针刺预制体: 201721270815.7[P]. 2018-05-22.
MIAO Yunliang. Carbon fiber composite metal material needle punched preform: 201721270815.7[P]. 2018-05-22.
[24] 缪云良. 仿形立体织物: 201920092607.5[P]. 2020-01-21.
MIAO Yunliang. Shaped three-dimensional fabric: 201920092607.5[P]. 2020-01-21.
[25] 刘延友, 程海霞, 乔志炜. 一种密度可调可控的针刺预制体及其制备方法:201811272773.X[P]. 2020-05-29.
LIU Yanyou, CHENG Haixia, QIAO Zhiwei. Density adjustable and controllable acupuncture preform and its preparation method: 201811272773.X[P]. 2020 -05-29.
[26] 尹锋, 吴桑. 一种由不同密度层构成的针刺预制体及其制备方法:201910542487.9[P]. 2019-09-20.
YIN Feng, WU Sang. A needle punched preform of different densities and its preparation method: 201910542487.9[P]. 2019-09-20.
[27] 李典森, 姚倩倩, 姜楠, 等. 室温和高温下三维针刺炭/炭复合材料的弯曲性能及破坏机制[J]. 新型炭材料, 2016(4):437-444.
LI Diansen, YAO Qianqian, JIANG Nang, et al. Bending properties and failure mechanism of three-dimensional needle-punched carbon/carbon composites at room temperature and high temperature[J]. New Carbon Materials, 2016 ( 4):437-444
[28] 张波, 贺平照, 梁建伟, 等. 针刺C/C复合材料高温剪切强度研究[J]. 材料导报, 2018,32(S2):270-285.
ZHANG Bo, HE Pingzhao, LIAN Jianwei, et al. Research on high-temperature shear strength of seedle-punched C/C composites[J]. Materials Reports, 2018,32(S2):270-285.
[29] 郑伟, 林志远, 刘芹, 等. 针刺C/C复合材料高温力学性能[J]. 宇航材料工艺, 2017,47(6):47-49.
ZHENG Wei, LIN Zhiyuan, LIU Qin, et al. High temperature mechanical properties of acupuncture C/C composites[J]. Aerospace Materials & Technology, 2017,47(6):47-49.
[30] XIE W, YANG F, MENG S, et al. Perforation of needle-punched carbon-carbon composites during high temperature and high-velocity ballistic impacts[J]. Composite Structures, 2020,245:1-10.
[31] WAN F, LIU R, WANG Y, et al. In situ observation of compression damage in a 3D needled-punched carbon fiber-silicon carbide ceramic matrix composite[J]. Composite Structures, 2019,210:189-201.
doi: 10.1016/j.compstruct.2018.11.041
[32] XIE J, FANG G, CHEN Z, et al. An anisotropic elastoplastic damage constitutive model for 3D needled C/C-SiC composites[J]. Composite Structures, 2017,176:164-177.
doi: 10.1016/j.compstruct.2017.04.043
[33] JIA Y, LIAO D, CUI H, et al. Modelling the needling effect on the stress concentrations of laminated C/C composites[J]. Materials & Design, 2016,104:19-26.
[34] QI Y, FANG G, WANG Z, et al. An improved analytical method for calculating .pngfness of 3D needled composites with different needle-punched processes[J]. Composite Structures, 2020,237:1-11.
[35] YU J, ZHOU C, ZHANG H. A micro-image based reconstructed finite element model of needle-punched C/C composite[J]. Composites Science and Technology, 2017,153:48-61.
doi: 10.1016/j.compscitech.2017.09.029
[36] MENG S, SONG L, XU C, et al. Predicting the effective properties of 3D needled carbon/carbon composites by a hierarchical scheme with a fiber-based representative unit cell[J]. Composite Structures, 2017,172:198-209.
doi: 10.1016/j.compstruct.2017.03.090
[37] HAN M, ZHOU C, ZHANG H. A mesoscale beam-spring combined mechanical model of needle-punched carbon/carbon composite[J]. Composites Science & Technology, 2018,168(10):371-380.
[38] HAN M, ZHOU C, SILBERSCHMIDT V. Mesoscale damage analysis of needle-punched carbon/carbon composite considering randomness of inherent defects[J]. Composites Science and Technology, 2019,183:1-12.
[39] XIE J, CHEN X, ZHANG Y, et al. Experimental and numerical investigation of the needling process for quartz fibers[J]. Composites Science and Technology, 2018,165:115-123.
doi: 10.1016/j.compscitech.2018.06.009
[40] JIA D, DUAN H, ZHAN S, et al. Design and development of lubricating material database and research on performance prediction method of machine learning[J]. Scie.pngic Reports, 2019,9(1):1-11.
[1] 陈小明, 李皎, 张一帆, 谢军波, 李晨阳, 陈利. 回转结构预制体柔性针刺成型系统设计[J]. 纺织学报, 2020, 41(11): 156-161.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!