Journal of Textile Research ›› 2021, Vol. 42 ›› Issue (03): 136-142.doi: 10.13475/j.fzxb.20191005207

• Dyeing and Finishing & Chemicals • Previous Articles     Next Articles

Luminescent properties of rare earth aluminate on fabrics

ZHAO Huan, PAN Li(), CUI Xiaoshuang   

  1. School of Fashion, Dalian Polytechnic University, Dalian, Liaoning 116034, China
  • Received:2019-10-24 Revised:2020-12-24 Online:2021-03-15 Published:2021-03-17
  • Contact: PAN Li E-mail:1020404190@qq.com

RichHTML

2

PDF (PC)

68

Abstract:

In order to improve the luminous printing effect of rare earth aluminate on fabrics,the method of single factor analysis and orthogonal experimental study were adopted to investigate the effect of the particle size and theadding quantity of the luminescent material, adhesive concentration, mesh number and the baking conditions on the preparation of printing performance of pure cotton and polyester/cotton (65/35) fabrics. Under the optimal preparation conditions, the influences of different colored luminescent materials and different colored fabric substrates on luminescent printing effect were explored. Finally, the wearability of printed fabrics with better luminescent effect was tested and analyzed. The experimental results show that the best parameters of luminescent printing process are 30 μm particle size of luminescent material, 25% content of luminescent material, 50% concentration of adhesive, 80 mesh number of the screen, with 160 ℃ baking for 3 min. Individual differences in the luminescence effect exist for different color substrates, among which the higher the luminosity of the fabric substrates, the better the luminescence effect.The wearability of the light-emitting printed fabric is regarded as acceptable.

Key words: rare earth aluminate, luminescent fabric, printing, luminescent property, wearability

CLC Number: 

  • TS194.6

Tab.1

Factors and levels of orthogonal experiment"

水平 A
发光材料
粒径/μm		 B
发光材料
添加量/%		 C
黏合剂质量
分数/%
1 20 15 40
2 30 20 50
3 40 25 60

Fig.1

Effect of particle size of luminescent material on brightness of fabric"

Fig.2

Comparison of influence of luminescent material particle size on luminescent effect. (a) Polyester/cotton sample; (b) Pure cotton sample"

Fig.3

Effect of luminescent material addition on brightness of fabric"

Fig.4

Comparison of influence of luminescence material addition on luminescence effect. (a) Polyester/cotton sample; (b) Pure cotton sample"

Fig.5

Effect of binder concentration on brightness of fabric"

Fig.6

Comparison of influence of adhesive concentration on luminescence effect. (a) Polyester/cotton sample; (b) Pure cotton sample"

Tab.2

Influence of mesh size on brightness of fabric"

丝网目数 亮度/(cd·m-2)
涤/棉 纯棉
80 6 613 665
100 6 380 620
120 5 838 578

Fig.7

Effect of baking time on brightness of fabric. (a)Baking for 3 min;(b)Baking for 5 min"

Tab.3

Results and analysis of orthogonal experiment on luminescence performance of polyester/cotton and pure cotton fabrics"

试验号 A B C 亮度/(cd·m-2)
涤/棉 纯棉
1 20 15 40 4 874 445
2 20 20 60 5 403 548
3 20 25 50 6 301 623
4 30 15 60 6 887 674
5 30 20 50 7 532 719
6 30 25 40 7 358 689
7 40 15 50 6 679 533
8 40 20 40 6 327 496
9 40 25 60 5 927 458
涤/棉
亮度		 均值1 5 526 6 146.667 6 186.334
均值2 7 259 6 420.667 6 837.334
均值3 6 311 6 528.667 6 072.334
极差 1 733 382 765
纯棉
亮度		 均值1 538.667 550.667 543.334
均值2 694.000 587.667 625.000
均值3 495.667 590.000 560.000
极差 198.333 39.333 81.667

Fig.8

Luminescence effect of polyester/cotton and cotton fabric under the best experimental conditions. (a) Polyester/cotton sample;(b) Pure cotton sample"

Fig.9

Emission spectrum of different color luminescent materials on polyester/cotton fabric"

Fig.10

Luminescence effect of different color luminescent materials on polyester/cotton fabric"

Fig.11

Effect of different color fabric substrates on brightness of polyester/cotton fabric"

Fig.12

Luminescent effect of different color on polyester/cotton fabric substrates under the best experimental conditions. (a)Bright in fabric;(b) Matte in fabric"

Fig.13

Effect of different lightness fabric substrates on brightness of polyester/cotton fabric"

Fig.14

Luminescent effect on substrate of polyester/cotton fabric with different lightness under the best experimental conditions. (a) Bright in fabric;(b)Matte in fabric"

Tab.4

Wearability of polyester/cotton luminescent printed fabric"

试验组 黏合剂质
量分数/%		 焙烘条件 悬垂系数/% 拉伸断裂强力/N 耐磨次数 色牢度/级
温度/℃ 时间/min 日晒 摩擦 皂洗
A 40 160 3 59 899.4 219 3 3 2
50 67 942.7 345 4~5 3~4 2~3
60 83 967.9 589 4~5 3~4 2~3
70 86 985.3 643 4~5 4 3
B 50 140 3 61 922.3 134 4~5 3 2
5 73 811.8 285 4~5 3~4 2
150 3 67 938.6 345 4~5 3 2~3
5 74 854.3 365 4~5 3.5~4 2~3
160 3 76 942.7 489 4~5 3.5 2
5 80 902.2 435 4~5 4 2~3
170 3 78 977.1 427 4~5 3.5 2
5 83 913.2 409 4~5 4 2~3
[1] 肖志国. 夜光材料及其制品[M]. 北京: 化学工业出版社, 2002:76-82, 93-113,149.
XIAO Zhiguo. Luminous materials and their products[M]. Beijing: Chemical Industry Press, 2002:76-82, 93-113,149.
[2] 李建宇. 稀土发光材料及其应用[M]. 北京: 化学工业出版社, 2003:3-22, 92-139.
LI Jianyu. Rare earth luminescent materials and their applications[M]. Beijing: Chemical Industry Press, 2003:3-22, 92-139.
[3] 卡赞金, 马尔科夫斯基. 无机发光材料[M]. 丁清秀,刘洪楷,译. 北京: 化学工业出社, 1980:1-71, 77-89.
CARDWOWGOL, MALKOWSKI. Common luminescence materials[M]. DING Qingxiu, LIU Hongkai, Translating. Beijing: Chemical Industry Press, 1980:1-71, 77-89.
[4] 孙家跃, 杜海燕, 胡文祥. 固体发光材料[M]. 北京: 化学工业出版社, 2003: 3-209.
SUN Jiayue, DU Haiyan, HU Wenxiang. Solid luminescent materials[M]. Beijing: Chemical Industry Press, 2003: 3-209.
[5] 刘岚. Eu2+,Pr3+共激活Sr3Al2O6基红色长余辉发光材料的研究[D]. 天津:天津大学, 2007: 4-8.
LIU Lan. Eu2+,Pr3+ Co-activated Sr3Al2O6-based red long-afterglow luminescent materials[D]. Tianjin:Tianjin University, 2007: 4-8.
[6] 王建, 余媛, 葛明桥. 高弹性夜光织物的制备及性能研究[J]. 功能材料, 2016,47(4):108-111.
WANG Jian, YU Yuan, GE Mingqiao. Preparation and properties of high elastic luminous fabrics[J]. Functional Materials, 2016,47(4):108-111.
[7] 罗军, 张开砚, 李梦娟, 等. 静电纺稀土铝酸锶发光纳米短纤维的制备与表征[J]. 纺织学报, 2015,36(1):1-5.
LUO Jun, ZHANG Kaiyan, LI Mengjuan, et al. Preparation and characterization of strontium aluminate luminescent nanometer staple fiber for electrostatic spinning rare earth[J]. Journal of Textile Research, 2015,36(1):1-5.
[8] 西鹏, 舒登坤. 纳微米醋酸纤维素多孔发光纤维的制备及其荧光性能[J]. 天津工业大学学报, 2017 (6):1-5.
XI Peng, SHU Dengkun. Preparation and fluorescence properties of nanomoter cellulose acetate porous luminescent fibers[J]. Journal of Tiangong University, 2017(6):1-5.
[9] 闫彦红, 王来力, 顾冰菲. 儿童夜光安全服装的等效亮度[J]. 纺织学报, 2019,40(8):136-140.
YAN Yanhong, WANG Laili, GU Bingfei. Equivalent luminance of children's safety clothing in night light[J]. Journal of Textile Research, 2019,40(8):136-140.
[10] 史晨, 侯雪斌, 晋阳, 等. 长余辉发光再生纤维素纤维的制备[J]. 纺织学报, 2016,37(12):1-5.
SHI Chen, HOU Xuebin, JIN Yang, et al. Preparation of long after glow regenerated cellulose fiber[J]. Journal of Textile Research, 2016,37(12):1-5.
[11] 郝士杰, 张丽平. 发光材料在纺织上的应用研究进展[J]. 纺织导报, 2017(11):64-67.
HAO Shijie, ZHANG Liping. Progress in application of luminescent materials in textile[J]. Textile Leader, 2017(11):64-67.
[12] EBRAHIMZADE A, MOJTAHEDI MRM, RAHBAR RS. Study on characteristics and afterglow properties of luminous polypropylene/rare earth strontium aluminate fiber[J]. Journal of Materials Science Materials in Electronics, 2017,28(11):8167-8176.
[13] 袁燕, 孙莹莹, 曾令坤, 等. 丝网印刷夜光油墨的制备及性能研究[J]. 信息记录材料, 2014(4):26-29.
YUAN Yan, SUN Yingying, ZENG Lingkun, et al. Preparation and properties of silk-screen luminous ink[J]. Information Recording Materials, 2014(4):26-29.
[14] 朱瑞萍. 圆网夜光印花[J]. 江苏纺织, 2013(5):51-52.
ZHU Ruiping. Round net luminous printing[J]. Jiangsu Textiles, 2013(5):51-52.
[15] KHATTAB TA, REHA M, HAMOUDA T. Smart textile framework: photochromic and fluorescent cellulosic fabric printed by strontium aluminate pigment[J]. Carbohydrate Polymers, 2018,195(10):143-152.
[16] 刘瑞江, 张业旺, 闻崇炜, 等. 正交试验设计和分析方法研究[J]. 实验技术与管理, 2010,27(9):52-55.
LIU Ruijiang, ZHANG Yewang, WEN Chongwei, et al. Research on orthogonal experimental design and analysis method[J]. Experimental Technology and Management, 2010,27(9):52-55.
[17] 朱亚楠. 织物夜光涂层整理及性能研究[D]. 无锡:江南大学, 2011: 18-20.
ZHU Yanan. Study on finishing and properties of luminous coating on fabrics[D]. Wuxi: Jiangnan University, 2011: 18-20.
[1] ZHANG Chentian, ZHAO Lianying, GU Xuefeng. Wearability of hollow coffee carbon polyester/cotton blended weft plain knitted fabric [J]. Journal of Textile Research, 2021, 42(03): 102-109.
[2] LÜ Changliang, HAO Zhiyuan, CHEN Huimin, ZHANG Huile, YUE Xiaoli. Finite element analysis of loop shape in weft knitted fabrics with small deformation based on homogenization theory [J]. Journal of Textile Research, 2021, 42(03): 21-26.
[3] GUAN Binbin, LI Qing, CHEN Linghui, XU Yuting, FAN Zenglu. Fluorescence detection of Cr(VI) from printing and dyeing wastewater by zirconium-organic framework [J]. Journal of Textile Research, 2021, 42(02): 122-128.
[4] CAO Genyang, WANG Yunli, SHENG Dan, PAN Heng, XU Weilin. Promotion mechanism of color fastness to sublimation in thermovacuum environmental conditions for fibroin powder/pigment complex [J]. Journal of Textile Research, 2021, 42(02): 1-6.
[5] SONG Xing, JIN Xiaoke, ZHU Chengyan, CAI Fengjie, TIAN Wei. 3D printing and mechanical properties of glass fiber/photosensitive resin composites [J]. Journal of Textile Research, 2021, 42(01): 73-77.
[6] WANG Shudong, MA Qian, WANG Ke, QU Caixin, QI Yu. Structure and biocompatibility of silk fibroin/gelatin blended hydrogels [J]. Journal of Textile Research, 2020, 41(11): 41-47.
[7] SHEN Ruichao, CHI Xinfu, SUN Yize. Redundant actuation control strategy of positioning platform for 3-D additive printing machine [J]. Journal of Textile Research, 2020, 41(10): 164-169.
[8] ZHU Qing, XU Dandan, PAN Yuange, WANG Chenglong, ZHENG Jinhuan. Influence of waterborne polyacrylate on printing effect of coated label fabrics [J]. Journal of Textile Research, 2020, 41(08): 55-62.
[9] ZHENG Tianzi, WANG Jianping. Perceptual research on printing pattern design for clothing [J]. Journal of Textile Research, 2020, 41(08): 101-107.
[10] MA Feifei. Stab-resistant performance and wearability of composite materials made by discrete resin molding [J]. Journal of Textile Research, 2020, 41(07): 67-71.
[11] JIN Shiyi, ZHOU Jiu. Innovative design of fabrics combining jacquard design and printing and clipping with a two-layer effect [J]. Journal of Textile Research, 2020, 41(06): 48-54.
[12] HOU Xueni, CHEN Guoqiang, XING Tieling. Influence of physical property of reactive ink fluid on jetting behavior [J]. Journal of Textile Research, 2020, 41(03): 91-99.
[13] ZHANG Xiaohui, YANG Tong, MA Pibo. Preparation and compression properties of bamboo-structure hollow monofilaments by 3D printing [J]. Journal of Textile Research, 2019, 40(12): 32-38.
[14] WANG Xiaohui, LIU Yuegang, MENG Zhuo, SUN Yize. Optimization of process parameters for 3D additive screen printing based on genetic algorithm and neural network [J]. Journal of Textile Research, 2019, 40(11): 168-174.
[15] YE Jiahao, WANG Lili, WU Minghua, GUO Wendeng, WANG Kehao, CHEN Ni. Sizing process of silk fabric by double-sided digital ink-jet printing with same colors and designs [J]. Journal of Textile Research, 2019, 40(10): 92-97.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
京ICP备14006648号
Copyright 2021 © Editorial office of Journal of Textile Research
Supported by Beijing Magtech Co.Ltd