Journal of Textile Research ›› 2021, Vol. 42 ›› Issue (02): 1-6.doi: 10.13475/j.fzxb.20210106206

• Invited Paper •     Next Articles

Promotion mechanism of color fastness to sublimation in thermovacuum environmental conditions for fibroin powder/pigment complex

CAO Genyang, WANG Yunli, SHENG Dan, PAN Heng, XU Weilin()   

  1. State Key Laboratory of New Textile Materials and Advanced Processing Technologies,Wuhan Textile University, Wuhan, Hubei 430200, China
  • Received:2021-01-05 Revised:2021-01-25 Online:2021-02-15 Published:2021-02-23
  • Contact: XU Weilin E-mail:weilin_xu@wtu.edu.cn

Abstract:

In order to improve the thermal sublimation fastness of pigment particles on colored fabrics under thermovacuum environmental conditions, surface morphology, particle size and molecular structure of naphthol red F3RK pigment particles and silk fibroin powders were investigated, and the color of the fabric was tuned by mixing pigment particles with silk fibroin powder at different ratios. The subatomospheric pressure is used to simulate the thermal force field in the thermalvacuum environment, under which the adsorption performance was studied under different mixing ratios between pigment particles and silk fibroin powder. The interaction between silk fibroin powders and pigment particles were discussed, and the theoretical model was established. The results show that the silk fibroin powder is effective in improving thermal sublimation of colored fabrics in thermovacuum environmental conditions due to the synergistic effect of its large specific surface area and amido bonds. Employment of this method increases thermal sublimation fastness to level 5. The results of this study are of referencing significance for improving the thermal sublimation fastness of colored fabrics under extreme environmental conditions.

Key words: silk fibroin powder, nano-pigment, printing, thermovacuum environmental condition, thermal sublimation fastness

CLC Number: 

  • TS194.2

Fig.1

Characteristics of silk fibroin powder and pigment powder. (a) Molecular structure of naphthol red F3RK; (b) Molecular structure of silk fibroin; (c) Particle size and surface morphology;(d) Differential pore size distribution of silk fibroin powder; (e) Integral pore size distribution of silk fibroin powder"

Fig.2

Surface morphology of naphthol red F3RK powder and naphthol red F3RK particles adsorbed by silk fibroin powder. (a) Naphthol red F3RK powder;(b) Mix suction filtration residue of 0.5 g naphthol red F3RK powder and 5.0 g silk fibroin powder"

Fig.3

Effect of mixing ratio on adsorption capacity of silk fibroin powder"

Fig.4

Storage modulus image of different powder"

Fig.5

Model of micro-nano silk fibroin powder regulating pigment film structure"

Fig.6

Comparison samples with and without silk fibroin powder treated in high-low temperature circulation for 6.5 times in high vacuum. (a)Frock of winded samples in thermovacuum environmental conditions; (b) Sample treated with silk fibroin powder; (c) Sample treated without silk fibroin powder"

Tab.1

Sublimation fastness of fabrics controlled by silk fibroin powder"

样品 耐热升华色牢度/级
红色 黄色
未调控样品 1 2
调控样品 5 5
[1] 孙志彬, 丁立, 田寅生, 等. 模拟太空环境下织物导热系数的测试研究[J]. 航天医学与医学工程, 2014,27(4):276-279.
SUN Zhibin, DING Li, TIAN Yansheng, et al. Experimental study on thermal conductivity of textile material in simulated space environment[J]. Space Medicine & Medical Engineering, 2014,27(4):276-279.
[2] 孙晓婷, 郭亚. 高性能纤维的性能及应用[J]. 成都纺织高等专科学校学报, 2017,34(2):216-219.
SUN Xiaoting, GUO Ya. Properties and applications of high performance fiber[J]. Journal of Chengdu Textile College, 2017,34(2):216-219.
[3] 王红, 楚久英. 芳香族聚酰胺纤维研究进展及应用[J]. 国际纺织导报, 2020,48(4):4, 6-9.
WANG Hong, CHU Jiuying. Research progress and application of aromatic polyamide fiber[J]. Melliand China, 2020,48(4):4, 6-9.
[4] 袁玥, 李鹏飞, 凌新龙. 芳纶纤维的研究现状与进展[J]. 纺织科学与工程学报, 2019,36(1):146-152.
YUAN Yue, LI Pengfei, LING Xinlong. Research status and progress of aramid fibers[J]. Journal of Textile Science and Engineering, 2019,36(1):146-152.
[5] 宋翠艳, 宋西全, 邓召良. 间位芳纶的技术现状和发展方向[J]. 纺织学报, 2012,33(6):125-128,135.
SONG Cuiyan, SONG Xiquan, DENG Zhaoliang. Technology status and development trend of m-aramid fibers[J]. Journal of Textile Research, 2012,33(6):125-128,135.
[6] WU Y J, SEFERIS J C, LORENTZ V. Evaluations of an aramid fiber in nonwoven processes for honeycomb applications[J]. Journal of Applied Polymer Science, 2002,86(5):1149-1156.
[7] 邓婷婷, 张光先, 代方银, 等. 对位芳纶磷酸化表面改性[J]. 纺织学报, 2015,36(11):12-19.
DENG Tingting, ZHANG Guangxian, DAI Fangyin, et al. Surface modification of para-aramid fiber by phosphoric acid[J]. Journal of Textile Research, 2015,36(11):12-19.
[8] VOLOKHINA A V. High-strength aramid fibres made from polymer blends[J]. Fibre Chemistry, 2000,32(4):230-234.
[9] 朱正锋, 齐大鹏, 王军华, 等. 超声波处理对对位芳纶纤维侵蚀性能的影响[J]. 纺织学报, 2012,33(1):24-28.
ZHU Zhengfeng, QI Dapeng, WANG Junhua, et al. Erosion of para-aramid fiber caused by ultrasonic treatment[J]. Journal of Textile Research, 2012,33(1):24-28.
[10] 林琳. 对位芳纶的染色及纤维结构与性能研究[D]. 上海: 东华大学, 2015: 9-10.
LIN Lin. Study on the dyeing process of para-aramid fibers and their structure and properties[D]. Shanghai: Donghua University, 2015: 9-10.
[11] MIRIAM T L, ÁLVARO M O, SAÚL V, et al. Intrinsically colored wholly aromatic polyamides (aramids)[J]. Dyes and Pigments, 2015,122:177-183.
[12] 宋翠艳, 宋西全, 王中平. 原液着色间位芳纶短纤维及其制备方法: ZL2006100436603[P]. 2006-10-18.
SONG Cuiyan, SONG Xiquan, WANG Zhongping. Dope colored meta-aramid staple fiber and its preparation method: ZL2006100436603[P]. 2006-10-18.
[13] SHENG D, WANG Y L, WANG X, et al. Low- temperature dyeing of meta-aramid fabrics pretreated with 2-phenoxyethanol[J]. Coloration Technology, 2017,133(4):320-324.
[14] KIM E M, CHOI J H. Dyeing properties and color fastness of 100% meta-aramid fiber[J]. Fibers and Polymers, 2011,12(4):484-490.
doi: 10.1007/s12221-011-0484-7
[15] 林自源. 航天服材料与发展动向[J]. 中国空间科学技术, 1989(4):48-54.
LIN Ziyuan. Material of space suit and developing trend[J]. Chinses Space Science and Technology, 1989(4):48-54.
[16] 胡彬慧, 何秀玲, 谢启凡, 等. 雄蚕生丝的热学性能研究[J]. 蚕业科学, 2016,42(2):294-301.
HU Binhui, HE Xiuling, XIE Qifan, et al. Research in thermal properties of raw silk of male silkworm[J]. Science of Sericulture, 2016,42(2):294-301.
[1] GUAN Binbin, LI Qing, CHEN Linghui, XU Yuting, FAN Zenglu. Fluorescence detection of Cr(VI) from printing and dyeing wastewater by zirconium-organic framework [J]. Journal of Textile Research, 2021, 42(02): 122-128.
[2] SONG Xing, JIN Xiaoke, ZHU Chengyan, CAI Fengjie, TIAN Wei. 3D printing and mechanical properties of glass fiber/photosensitive resin composites [J]. Journal of Textile Research, 2021, 42(01): 73-77.
[3] WANG Shudong, MA Qian, WANG Ke, QU Caixin, QI Yu. Structure and biocompatibility of silk fibroin/gelatin blended hydrogels [J]. Journal of Textile Research, 2020, 41(11): 41-47.
[4] SHEN Ruichao, CHI Xinfu, SUN Yize. Redundant actuation control strategy of positioning platform for 3-D additive printing machine [J]. Journal of Textile Research, 2020, 41(10): 164-169.
[5] ZHU Qing, XU Dandan, PAN Yuange, WANG Chenglong, ZHENG Jinhuan. Influence of waterborne polyacrylate on printing effect of coated label fabrics [J]. Journal of Textile Research, 2020, 41(08): 55-62.
[6] ZHENG Tianzi, WANG Jianping. Perceptual research on printing pattern design for clothing [J]. Journal of Textile Research, 2020, 41(08): 101-107.
[7] JIN Shiyi, ZHOU Jiu. Innovative design of fabrics combining jacquard design and printing and clipping with a two-layer effect [J]. Journal of Textile Research, 2020, 41(06): 48-54.
[8] HOU Xueni, CHEN Guoqiang, XING Tieling. Influence of physical property of reactive ink fluid on jetting behavior [J]. Journal of Textile Research, 2020, 41(03): 91-99.
[9] ZHANG Xiaohui, YANG Tong, MA Pibo. Preparation and compression properties of bamboo-structure hollow monofilaments by 3D printing [J]. Journal of Textile Research, 2019, 40(12): 32-38.
[10] WANG Xiaohui, LIU Yuegang, MENG Zhuo, SUN Yize. Optimization of process parameters for 3D additive screen printing based on genetic algorithm and neural network [J]. Journal of Textile Research, 2019, 40(11): 168-174.
[11] YE Jiahao, WANG Lili, WU Minghua, GUO Wendeng, WANG Kehao, CHEN Ni. Sizing process of silk fabric by double-sided digital ink-jet printing with same colors and designs [J]. Journal of Textile Research, 2019, 40(10): 92-97.
[12] CHEN Zhijie, HU Xudong, HUANG Zhuo, SONG Limiao, QI Dongming, XIANG Zhong. Preparation of silicone-containing pigment capsules by miniemulsionpolymerization and printing performance thereof on polyester fabric [J]. Journal of Textile Research, 2019, 40(08): 69-75.
[13] YANG Haizhen, FANG Kuanjun, LIU Xiuming, CAI Yuqing, AN Fangfang, HAN Shuang. Influence of cotton fabric structure on ink droplet spreading and color performance [J]. Journal of Textile Research, 2019, 40(07): 78-84.
[14] SONG Xing, ZHU Chengyan, CAI Fengjie, LÜ Zhining, TIAN Wei. Influence of alkali treatment on mechanical properties of polyester/photosensitive resin composites [J]. Journal of Textile Research, 2019, 40(07): 97-102.
[15] AI Li, ZHU Yawei. Synthesis of binder and application in polyester fabric with micro-water printing of disperse blue 79 [J]. Journal of Textile Research, 2019, 40(06): 50-57.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!