纺织学报 ›› 2019, Vol. 40 ›› Issue (01): 79-83.doi: 10.13475/j.fzxb.20171205906

• 染整与化学品 • 上一篇    下一篇

聚乳酸织物载体染色性能

武奇奇1,2, 李敏1,2, 刘怡宁3, 王乐军3, 张丽平1,2, 付少海1,2()   

  1. 1.江苏省纺织品数字喷墨印花工程技术研究中心, 江苏 无锡 214122
    2.生态纺织教育部重点实验室(江南大学),江苏 无锡 214122
    3.恒天纤维集团有限公司, 北京 100020
  • 收稿日期:2017-12-29 修回日期:2018-08-25 出版日期:2019-01-15 发布日期:2019-01-18
  • 通讯作者: 付少海
  • 作者简介:武奇奇(1995—),女,硕士生。主要研究方向为聚乳酸织物的载体染色性能。
  • 基金资助:
    国家重点研发计划项目(2017YFB0309300)

Dyeing properties of polylactic acid fabric by carrier dyeing method

WU Qiqi1,2, LI Min1,2, LIU Yining3, WANG Lejun3, ZHANG Liping1,2, FU Shaohai1,2()   

  1. 1. Jiangsu Engineering Research Center for Digital Textile Inkjet Printing, Wuxi, Jiangsu 214122, China
    2. Key Laboratory of Eco-Textiles (Jiangnan University), Ministry of Education, Wuxi, Jiangsu 214122, China
    3. Hengtian Fiber Group Co., Ltd., Beijing 100020, China
  • Received:2017-12-29 Revised:2018-08-25 Online:2019-01-15 Published:2019-01-18
  • Contact: FU Shaohai

摘要:

针对分散染料在常压下染色聚乳酸(PLA)织物得色浅,而高温高压染色织物强力损伤大的问题,采用载体染色法,研究了载体种类、载体用量、染色温度和时间等因素对PLA织物染色性能的影响。借助扫描电子显微镜和X射线衍射仪对染色纤维进行了表征,并分析了最佳工艺下分散染料在PLA织物上的染色性能。结果表明:在载体90BHC质量分数为0.25%、染料分散红SE-3B用量为2%(o.w.f)、温度为90 ℃、保温时间40 min的条件下,PLA织物表观色深值(K/S值)可超过高温高压染色的效果(K/S值为23.21),PLA织物顶破强力损伤较小(下降2.7%);纤维表面没有受到损伤,同时染色过程对纤维晶体形态没有影响;该染色方法获得的PLA织物透染性较好,耐日晒色牢度和耐皂洗色牢度优良。

关键词: 聚乳酸织物, 分散染料, 载体染色, 顶破强力, 染色性能

Abstract:

In order to solve the shallow coloration of polylactic acid(PLA) dyed fabrics under normal pressure and the damage of fabrics dyed under high temperature and pressure, the influence of dyeing factors such as carrier type and dosage and dyeing temperature on dyeing properties of PLA fabrics were investigated by carrier dyeing method. By analyzing the scanning electro microscopy and X-ray diffraction of the dyed fabric, the dyeing properties of disperse dyes on PLA fabrics under optimum conditions were studied. It is found that the apparent color depth value (K/S value) of PLA fabric can reach the same effect as high temperature and pressure dyeing (K/S value is 23.21) under the conditions of the carrier (90BHC, 0.25%), disperse red SE-3B (2% o.w.f) and temperature of 90 ℃ and holding for 40 min, while the burst strength loss of fabric is lower (decreased 2.7%). The fiber surface is not damaged, and the dyeing process has no effect on the crystal morphology of the fiber. The dyeing properties of disperse dyes on PLA fabrics were studied. The fiber-striping test shows that the PLA fabrics obtained by this dyeing method is better in dye penetration. The fastness to sunlight and color fastness to soaping shows that the fastness of disperse dyes on PLA fabrics is excellent.

Key words: polylactic acid fabric, disperse dye, carrier dyeing, burst strength, dyeing property

中图分类号: 

  • TS193.5

图1

载体染色工艺曲线"

图2

高温高压染色工艺曲线"

图3

常规染色工艺曲线"

表1

载体种类对K/S值的影响"

载体种类 K/S 载体种类 K/S
1-烷基-2-吡咯烷酮 6.54 马来酰亚胺 8.92
N-羟基琥珀酰亚胺 7.54 乳酸乙酯 10.03
90BHC 23.52

表2

不同染色方法的染色效果对比"

染色方法 K/S L* a* b* C* ΔE 顶破强力/N 强力下降率/%
载体染色法 23.21 37.36 56.68 14.34 58.87 0.14 961.1 2.7
高温高压染色 19.28 43.75 59.68 19.98 63.78 0.20 880.8 10.8

图4

不同因素对K/S值的影响 (a) Carrier dosage;(b) Dyeing temperature;(c) Temperature maintaining time"

表3

不同染色方法染色织物的性能对比"

染色方法 染料 K/S 上染百分率/% 顶破强力/N 耐皂洗牢度/级 耐晒牢度/级
变色 沾色
载体染色 分散红SE-3B 23.27 50.1 960.02 5 5 5
常规染色 分散红SE-3B 4.34 12.6 961.31 5 5 4

图5

载体染色前后纤维SEM照片"

图6

染色前后织物XRD图"

图7

染料上染速率曲线"

图8

染料提升力曲线"

图9

载体染色后纤维切片"

[1] 仇兆波. PLA和PET纤维染色同色性的研究[D]. 无锡:江南大学, 2013: 1-5.
QIU Zhaobo. Study on the chromaticity of PLA and PET fibers[D]. Wuxi: Jiangnan University, 2013: 1-5.
[2] 邵燕军. 聚乳酸(PLA)纤维织物深色染色研究[D]. 上海:东华大学, 2006: 7-10.
SHAO Yanjun. Study on dark color dyeing of polylactic acid (PLA) fabric[D]. Shanghai: Donghua University, 2006: 7-10.
[3] FU Z J, HUANG H F, YU L S, et al. Research on dyeing and finishing technology of polylactic acid fiber[J]. Applied Mechanics & Materials, 2013,364:660-663.
[4] 钱红飞. 聚乳酸纤维的结构及其对分散染料的吸附性能[J]. 纺织学报, 2012,33(3):63-66.
QIAN Hongfei. Strcture of polylactic acid fiber and adsorption properties of disperse dyes[J]. Journal of Textile Research, 2012,33(3):63-66.
[5] 杨文芳, 王雷. 超临界CO2在PLA纤维染色中的应用[J]. 纺织学报, 2007,28(10):59-63.
YANG Wenfang, WANG Lei. Application of supercritical CO2 in dyeing polylatic acid fiber[J]. Journal of Textile Research, 2007,28(10):59-63.
[6] 许素新. 分散染料染色机理及非水溶剂染色研究[D]. 上海:东华大学, 2015: 2-6.
XU Suxin. Research on the dyeing mechanism of disperse dyes and non-aqueous solvent dyeing[D]. Shanghai: Donghua University, 2015: 2-6.
[7] KARST D, NAMA D, YANG Y. Effect of disperse dye structure on dye sorption onto PLA fiber[J]. Journal of Colloid & Interface Science, 2007,310(1):106.
doi: 10.1016/j.jcis.2007.01.037 pmid: 17346722
[8] HUSSAIN T, TAUSIF M, ASHRAF M. A review of progress in the dyeing of eco-friendly aliphatic polyester-based polylactic acid fabrics[J]. Journal of Cleaner Production, 2015,108:476-483.
doi: 10.1016/j.jclepro.2015.05.126
[9] 赵涛. 染整工艺与原理[M]. 北京: 中国纺织出版社, 2009: 174-175.
ZHAO Tao. Dyeing and Finishing Technology and Principle [M]. Beijing: China Textile & Apparel Press, 2009: 174-175.
[10] 贾梦莉, 王春梅. 涤纶的苯甲酸苄酯载体染色[J]. 印染, 2016(4):22-25.
JIA Mengli, WANG Chunmei. Carrier dyeing of polyester with benzyl benzoate[J]. China Dyeing & Finishing, 2016(4):22-25.
[11] 李召岭. 聚乳酸纤维染色及与染料分子结构关系研究[D]. 淄博:山东理工大学, 2011: 35-37.
LI Zhaoling. Research on the dyeing property of polylactic acid fiber and its relationship with molecule structure of dyestuffs[D]. Zibo: Shandong University of Technology, 2011: 35-37.
[1] 王纯怡, 吴伟, 王健, 徐红, 毛志平. C.I.分散棕19 在超临界CO2 及水中溶解性的分子动力学模拟[J]. 纺织学报, 2020, 41(09): 95-101.
[2] 李瑞卿, 王伟, 魏炳举, 周长文, 张淑桃. 应用环保型还原剂的硫化黑染色工艺[J]. 纺织学报, 2020, 41(08): 50-54.
[3] 王小艳, 杜金梅, 彭铃淇, 荆丽丽, 许长海. 涤纶针织物碱减量和染色一浴一步法工艺 [J]. 纺织学报, 2020, 41(01): 80-87.
[4] 刘越, 莫林祥, 陈丰. 拼混型黑色分散染料的配伍性及其染色性能[J]. 纺织学报, 2019, 40(12): 63-67.
[5] 江华, 张志恒, 蔡金芳, 陈维国, 崔志华, 孙岩峰. 芳伯胺染料对蚕丝织物的重氮化-偶合染色及工艺调控[J]. 纺织学报, 2019, 40(11): 100-105.
[6] 韩虎 李伟婷 魏会芳 王小艳 孙昌 许长海. 酸性染料易染氨纶的染色动力学[J]. 纺织学报, 2019, 40(08): 76-79.
[7] 尹思力 杨洋 江文 石业新 周小华 黄金洪. 接枝蚕蛹肽羧基化粘胶纤维的制备及其优化工艺[J]. 纺织学报, 2019, 40(08): 14-19.
[8] 艾丽 朱亚伟. 黏合剂的合成及其在分散蓝79 微水印花中的应用[J]. 纺织学报, 2019, 40(06): 50-57.
[9] 艾丽 曹红梅 朱亚伟 丁志平. 基于液体分散染料的微量印花技术[J]. 纺织学报, 2018, 39(09): 77-83.
[10] 梁静 钟毅 毛志平 徐红 张琳萍 隋晓锋. 晶型对分散染料染色性能的影响[J]. 纺织学报, 2018, 39(07): 69-73.
[11] 姚萍 江文 王江 黄金洪 周小华. 接枝壳寡糖抗菌粘胶纤维的制备及其抗菌性与染色效果[J]. 纺织学报, 2018, 39(04): 9-13.
[12] 刘艳春 白刚 钱红飞. 聚酰亚胺织物的羧基化表面改性[J]. 纺织学报, 2018, 39(03): 103-107.
[13] 叶思佳 杜奕铃 张永高 郑今欢. 涤纶起绒织物着色烂花印花中分散染料的耐碱性[J]. 纺织学报, 2018, 39(01): 98-103.
[14] 俞俭 王业师 吕景春 周天池 魏取福. 低温等离子体处理木棉纤维的染色性能[J]. 纺织学报, 2017, 38(12): 88-94.
[15] 王晓春 闫金龙 张丽平 赵国樑 张健飞. 超高分子质量聚乙烯纤维分散染料染色性能[J]. 纺织学报, 2017, 38(11): 84-90.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!