全成形西服横向编织技术的工艺模型与实现

doi:10.13475/j.fzxb.20190803306

纺织学报 ›› 2020, Vol. 41 ›› Issue (07): 53-58.doi: 10.13475/j.fzxb.20190803306

全成形西服横向编织技术的工艺模型与实现

刘博, 丛洪莲()

江南大学教育部针织技术工程研究中心, 江苏无锡 214122

收稿日期:2019-08-13 修回日期:2020-03-22 出版日期:2020-07-15 发布日期:2020-07-23
通讯作者: 丛洪莲
作者简介:刘博(1987—),女,硕士生。主要研究方向为针织产品工艺设计。
基金资助:
国家自然科学基金项目(61602212);江苏省产学研联合创新资金-前瞻性联合研究项目(BY2018056)

Research and implementation of flat-bed knitting process model of fully formed suit

LIU Bo, CONG Honglian()

Engineering Research Center for Knitting Technology, Ministry of Education, Jiangnan University, Wuxi, Jiangsu 214122, China

Received:2019-08-13 Revised:2020-03-22 Online:2020-07-15 Published:2020-07-23
Contact: CONG Honglian

摘要/Abstract

摘要：

为深入研究全成形西服工艺,针对纵向编织方法难以实现复杂结构款型西服制作的问题,提出将西服沿背中线分解为左右2片分别进行编织再下机缝合的制作方法。根据四针床全成形横向编织工艺模型,从全成形服装的横向编织原理、成形方法出发,按照工艺模型设定上机参数并试织,实现了全成形西服的横向编织。研究结果表明:西服横向分片编织方法具有可行性,其中西服后领和背中线需要下机后缝合,此方法可实现前后片不同结构尺寸的T形、X形等廓形变化的西服款式,同时还能形成领部和门襟处的双面双层结构以及背中线、侧缝线结构,增加了西服的挺括性。

关键词: 全成形西服, 四针床电脑横机, 横向编织, 工艺模型

Abstract:

In order to further study the process of fully formed suit, and to solve the problem that the conventional circular knitting method is difficult to produce suits with complex structures and styles, this paper proposed a method for fully formed suits by decomposing a suit along the back midline into left and right pieces for knitting and stitching. The flat-bed knitting method was investigated into based on a four-needle bed flat knitting machine. Started from the flat-bed knitting principle and method, the parameters were set according to the process model, and then the design of a full-form suit was implemented. The results show that the flat-bad knitting method is feasible, in which the back collar and the back center of the suit need to be stitched off the machine, and the T-shaped, X-shaped and other wide-shaped suit styles with different structural sizes of the front and back were realized using this method. The double-sided double-layer structures for the collar and the placket, the back center line, the side suture can also be formed at the same time to increase the suitability of the suit.

Key words: fully formed suit, four-needle computerized flat-bed knitting machine, flat-bed knitting, process model

中图分类号:

TS184.5

刘博, 丛洪莲. 全成形西服横向编织技术的工艺模型与实现[J]. 纺织学报, 2020, 41(07): 53-58.

LIU Bo, CONG Honglian. Research and implementation of flat-bed knitting process model of fully formed suit[J]. Journal of Textile Research, 2020, 41(07): 53-58.

图/表 12

图1

图2

图3

图4

图5

图6

图7

图8

图9

表1

表2

图10

参考文献 10

[1]	王敏, 丛洪莲. 四针床电脑横机全成形技术研究进展[J]. 纺织导报, 2016(9): 96, 98-100.
	WANG Min, CONG Honglian. Technology of four-needle bed computerized flat knitting machine[J]. China Textile Leader, 2016(9): 96, 98-100.
[2]	王敏, 丛洪莲, 蒋高明, 等. 四针床电脑横机的全成形工艺[J]. 纺织学报, 2017,38(4):61-67.
	WANG Min, CONG Honglian, JIANG Gaoming, et al. Whole garment knitting process on four-bed computerized flat knitting machine[J]. Journal of Textile Research, 2017,38(4):61-67.
[3]	彭佳佳, 蒋高明, 丛洪莲, 等. 全成形毛衫的结构与编织原理[J]. 纺织学报, 2017,38(11):48-55.
	PENG Jiajia, JIANG Gaoming, CONG Honglian, et al. Structure and knitting principle of whole garment[J]. Journal of Textile Research, 2017,38(11):48-55.
[4]	邱庄岩, 花芬, 吴志明. 四针床全成形编织工艺及其应用[J]. 纺织学报, 2018,39(8):63-70.
	QIU Zhuangyan, HUA Fen, WU Zhiming. Process and application of full-forming knitting with four-needle bed[J]. Journal of Textile Research, 2018,39(8):63-70.
[5]	罗璇, 彭佳佳, 蒋高明, 等. 全成形毛衫样板设计及成形方法[J]. 纺织学报, 2018,39(7):105-110.
	LUO Xuan, PENG Jiajia, JIANG Gaoming, et al. Design and knitting shaping method of fully-fashioned knitwear[J]. Journal of Textile Research, 2018,39(7):105-110.
[6]	王盼, 吴志明. 全成形毛衫横向编织方式及其成形工艺[J]. 纺织学报, 2019,40(10):73-78.
	WANG Pan, WU Zhiming. Transverse knitting method and forming process of fully formed sweater[J]. Journal of Textile Research, 2019,40(10):73-78.
[7]	宗敏颖. 休闲西服细节设计的研究[D]. 上海:东华大学, 2010: 15-17.
	ZONG Minying. Research on the design of casual suits[D]. Shanghai:Donghua University, 2010: 15-17.
[8]	陆文沁, 王建萍, 钟萍, 等. 全成形针织服装研发现状与技术难点应对策略[J]. 针织工业, 2018(7):5-9.
	LU Wenqin, WANG Jianping, ZHONG Ping, et al. Study and development status and technical difficulties coping strategy of fully fashioned knitted garment[J]. Knitting Industries, 2018(7):5-9.
[9]	刘佳芮. 女装合体插肩袖结构设计方法研究[D]. 上海:东华大学, 2014: 23-24.
	LIU Jiarui. Research on women's fitting raglan sleeve structure design[D]. Shanghai: Donghua University, 2014: 23-24.
[10]	蒋高明, 郑培晓. 全成形针织毛衫编织工艺与装备技术研究进展[J]. 服装学报, 2019,4(1):40-48.
	JIANG Gaoming, ZHENG Peixiao. Research progress on knitting and equipment technology of whole knitted garment[J]. Journal of Clothing Research, 2019,4(1):40-48.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

位置	线圈长度/mm
位置	上针床	下针床
大身	6.2	6.4
袖口	6.0	6.2
前片(废纱组织)	6.0	7.2
后片(废纱组织)	4.5	4.5
衣领	6.8	7.0

纱嘴号码	使用区域	纱线成分	单纱线密度/tex
2(左)	废纱	涤纶高弹纱	66.7
4(左)	前片大身	天蚕丝	41.7
5(右)	门襟	天蚕丝	41.7
6(左)	后片大身	天蚕丝	41.7
6(右)	双层门襟分隔线	涤纶高弹纱	66.7
8(左)	起头橡筋纱	氨纶包覆纱	59.1
8(右)	分离纱	涤纶缝纫线	14.8

全成形西服横向编织技术的工艺模型与实现

Research and implementation of flat-bed knitting process model of fully formed suit

RichHTML

PDF (PC)

摘要/Abstract

引用本文

使用本文

图/表 12

参考文献 10

相关文章 6

Metrics

本文评价

推荐阅读 0

[1]	赵博宇, 梁鑫花, 丛洪莲. 电脑横机编织三维全成形口罩结构建模与工艺实践[J]. 纺织学报, 2020, 41(12): 59-65.
[2]	刘博, 丛洪莲. 四针床全成形休闲西服的工艺设计与成形原理[J]. 纺织学报, 2020, 41(04): 129-134.
[3]	王盼, 吴志明. 全成形毛衫横向编织方式及其成形工艺[J]. 纺织学报, 2019, 40(10): 73-78.
[4]	王盼, 吴志明. 全成形毛衫局部编织原理及其应用[J]. 纺织学报, 2019, 40(05): 41-46.
[5]	邱庄岩花芬吴志明. 四针床全成形编织工艺及其应用[J]. 纺织学报, 2018, 39(08): 63-70.
[6]	王敏丛洪莲蒋高明彭佳佳. 四针床电脑横机的全成形工艺[J]. 纺织学报, 2017, 38(04): 61-67.