喷墨参数对包覆颜料墨水印花清晰度的影响

纺织学报 ›› 2016, Vol. 37 ›› Issue (08): 72-76.

喷墨参数对包覆颜料墨水印花清晰度的影响

收稿日期:2015-09-09 修回日期:2016-04-13 出版日期:2016-08-15 发布日期:2016-08-05

Influence of inkjet printing parameters on imagine definition of coated pigment ink inkjet printing

Received:2015-09-09 Revised:2016-04-13 Online:2016-08-15 Published:2016-08-05

摘要/Abstract

摘要：

为提高颜料墨水喷墨印花的清晰度，确定适宜的自制颜料墨水的打印参数，以包覆颜料墨水为研究对象，探讨了喷射电压、电压输出波形、频率、喷射距离、喷墨量和基材温度等对其在纯棉织物上喷墨印花清晰度的影响。研究结果表明：喷射电压大，墨滴飞行速度快，会导致喷墨图案清晰度差；选择合适的喷射频率、电压输出波形和喷射距离，均可有效提升喷墨图案的清晰度；提升基材温度可很好地抑制墨水的渗化；喷墨量大，图案边缘渗化严重，印花图案清晰度差；包覆颜料墨水较佳的喷墨打印参数为喷射电压18V，喷射频率10~30 kHz，喷射距离0.6~0.8 mm，基材温度40°C。

关键词: 喷墨印花参数, 包覆颜料墨水, 喷墨印花, 清晰度

Abstract:

In order to improve the imagine definition of the pigment ink inkjet printing and determine suitable pigment ink printing parameters, taking nano coated pigment ink as the research object, the jetting voltage, waveform, inkjet amount, jetting frequency, jetting distance and substrate temperature which could affect the accuracy of inkjet printing were studied. Experimental results showed that higher jetting voltage endowed the drops with faster speed which was related to irregular designs. Proper jetting waveform, jetting frequency and jetting distance could improve the accuracy of designs effectively. High temperature could suppress the degree of ink bleeding. The greater the inkjet amount was, the worse the degree of the bleeding was. The proper printing parameters was jetting voltage of 18V, jetting frequency of 10-30kHz, jetting distance of 0.6-0.8mm and temperature of 40 oC.

Key words: inkjet printing parameters, coated pigment ink, inkjet printing, imagine definition

王大同张丽平李敏谭莹付少海. 喷墨参数对包覆颜料墨水印花清晰度的影响[J]. 纺织学报, 2016, 37(08): 72-76.

参考文献

相关文章 15

[1]	李敏赵影张丽平张奕付少海. 涤纶针织物数码印花清晰度的影响因素[J]. 纺织学报, 2018, 39(05): 62-66.
[2]	安亚洁李敏杜长森田安丽张奕付少海. 微量墨滴在蚕丝机织物上的扩散行为[J]. 纺织学报, 2018, 39(04): 87-92.
[3]	孟一丁邵建中黄益王成龙孙广东. 一体化聚氨酯丙烯酸酯的合成及其在光固化数码印花中的应用[J]. 纺织学报, 2018, 39(02): 97-105.
[4]	杨帆陈远辉顾晨成冒海燕王潮霞殷允杰. 紫外光固化水性聚氨酯丙烯酸酯黏合剂的印花性能[J]. 纺织学报, 2016, 37(3): 82-0.
[5]	吕继红鄢友娟汝新伟肖红. 军警迷彩图案和面料印花技术的特点及发展[J]. 纺织学报, 2015, 36(02): 158-0.
[6]	付少海王大同杜长森张丽平关玉许翠玲. 提高喷墨印花颜料墨水印花牢度的方法[J]. 纺织学报, 2015, 36(02): 141-0.
[7]	房宽峻刘尊东陈伟张健飞刘秀明蔡玉青. 棉织物表面处理对活性染料喷墨印花的影响[J]. 纺织学报, 2015, 36(02): 128-0.
[8]	陈丽;王潮霞. 涤纶喷墨印花织物的柠檬酸-β-环糊精预处理[J]. 纺织学报, 2011, 32(3): 100-104.
[9]	唐颖, 房宽峻, 张连兵, 付少海, 田安丽. 数字喷墨印花仿蜡印工艺初探[J]. 纺织学报, 2011, 32(12): 94-97.
[10]	唐颖;房宽峻;付少海;田安丽;张连兵. 蜡染冰纹的计算机仿真研究[J]. 纺织学报, 2010, 31(3): 128-132.
[11]	唐颖;房宽峻;沈雷. 分形图案与传统纺织印花图案的形式美感对比[J]. 纺织学报, 2009, 30(12): 90-94.
[12]	张春明;房宽峻;贡利华;赵珍玉;吴菡. 数字喷墨印花对服装图案设计的革新[J]. 纺织学报, 2008, 29(5): 75-79.
[13]	王潮霞;汪毅;朱锋. 颜料墨水对织物喷墨印花的适应性能[J]. 纺织学报, 2008, 29(10): 82-86.
[14]	王树根. 织物数字印花技术[J]. 纺织学报, 2002, 23(04): 74-75.
[15]	杨如馨;顾平. 微胶乳粘合剂织物喷墨印花的应用研究[J]. 纺织学报, 2001, 22(06): 45-46.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed