Journal of Textile Research ›› 2021, Vol. 42 ›› Issue (02): 180-184.doi: 10.13475/j.fzxb.20201008705

• Machinery & Accessories • Previous Articles     Next Articles

Numerical analysis on formation mechanism of airflow field in rotor spinning unit

SHI Qianqian1, WANG Jiang1, ZHANG Yuze1, LIN Huiting2, WANG Jun1,3()   

  1. 1. College of Textiles, Donghua University, Shanghai 201620, China
    2. College of Textile and Apparel, Quanzhou Normal University, Quanzhou, Fujian 362000, China
    3. Key Laboratory of Textile Science & Technology, Ministry of Education, Shanghai 201620, China
  • Received:2020-10-30 Revised:2020-11-07 Online:2021-02-15 Published:2021-02-23
  • Contact: WANG Jun E-mail:junwang@dhu.edu.cn

Abstract:

The airflow field in a rotor spinning unit under a normal working condition is mainly affected by the air suction mechanism and rotor rotation mechanism. In order to investigate the contribution of the two mechanisms to the formation of airflow field in the rotor spinning unit, three cases corresponding to different operating conditions were established for investigation, and the fluid domain in the three cases based on the computational fluid dynamics were numerically simulated. The velocity distribution and air pressure distribution of the airflow field in three cases were also analyzed and discussed. Numerical simulation results show that the airflow field in the rotor spinning unit is determined by the air suction at rotor outlet and the high-speed rotor rotation. The air suction mechanism provides the necessary air velocity and negative pressure environment for fiber's transportation. The rotation mechanism assists in smooth transfer of the fibers to the rotor slide wall, the ordered arrangement of fibers, and the accumulation of the fibers to rotor groove. It is under the joint action of the two mechanisms that a unique spinning environment where fibers are driven using air for rotor spinning is formed.

Key words: rotor spinning, airflow field, numerical simulation, air suction mechanism, rotor rotation mechanism, airflow distribution

CLC Number: 

  • TS111.8

Fig.1

Schematic diagram of rotor spinning unit"

Tab.1

Operating conditions design"

工况
编号
作用机制 转杯出口
负压/Pa
转杯旋转速
度/(r·min-1)
1 只抽不转 -5 500 -
2 只转不抽 - 30 080
3 既抽又转 -5 700 30 080

Fig.2

Dimensions of computational domain"

Fig.3

Mesh independency test for three different grid schemes: velocity magnitude. (a) Along X-axis at y=10 mm; (b) Along Y-axis in direction of center axis of transfer channel"

Fig.4

Meshed model and boundary conditions of computational domain"

Fig.5

Velocity vector distribution of airflow field in master view (a) and bottom view (b)"

Fig.6

Air pressure distribution of airflow field in case 1(a), case 2 (b) and case 3 (c)"

Fig.7

Air pressure distribution of airflow field along X at y=10 mm in 3 cases"

[1] LAWRENCE C A, CHEN K Z. Rotor-spinning[J]. Textile Progress, 1984,13(4):1-73.
[2] KWASNIAK J. An investigation of a new method to produce fancy yarns by rotor spinning[J]. Journal of the Textile Institute Proceedings & Abstracts, 1996,87(2):321-334.
[3] MATSUMOTO Y I, FUSHIMI S, SAITO H, et al. Twisting mechanisms of open-end rotor spun hybrid yarns[J]. Textile Research Journal, 2002,72(8):735-740.
[4] CHENG K B, MURRAY R. Effects of spinning conditions on structure and properties of open-end cover-spun yarns[J]. Textile Research Journal, 2000,70(8):690-695.
[5] KONG L X, PLATFOOT R A. Two-dimensional simulation of air flow in the transfer channel of open-end rotor spinning machines[J]. Textile Research Journal, 1996,66(10):641-650.
[6] YANG X W, CHEN H L, WU Z Y, et al. Numerical simulation of 3D flow in rotation cup of rotor spin-ning[J]. Applied Mechanics & Materials, 2011,80/81:1145-1149.
[7] 肖美娜, 窦华书, 武传宇, 等. 纺纱转杯内气流流动特性的数值分析[J]. 纺织学报, 2014,35(12):136-141.
XIAO Meina, DOU Huashu, WU Chuanyu, et al. Numerical simulations of air flow behavior in spinning rotor[J]. Journal of Textile Research, 2014,35(12):136-141.
[8] LIN H, ZENG Y, WANG J. Computational simulation of air flow in the rotor spinning unit[J]. Textile Research Journal, 2016,86(2):115-126.
[9] LIN H, BERGADA J M, ZENG Y, et al. Rotorspinning transfer channel design optimization via computational fluid dynamics[J]. Textile Research Journal, 2018,88(11):1244-1262.
[10] AKANKWASA N T, LIN H, ZHANG Y, et al. Numerical simulation of three-dimensional airflow in a novel dual-feed rotor spinning box[J]. Textile Research Journal, 2018,88(3):237-253.
[11] 王福军. 计算流体动力学分析:CFD软件原理与应用[M]. 北京: 清华大学出版社, 2004: 120-137.
WANG Fujun. Computational fluid dynamics analysis: CFD software principles and applications[M]. Beijing: Tsinghua University Press, 2004: 120-137.
[1] CHU Xi, QIU Hua. Flow simulations of ring swirl nozzle under different inlet pressure conditions [J]. Journal of Textile Research, 2020, 41(09): 33-38.
[2] DING Ning, LIN Jie. Free convection calculation method for performance prediction of thermal protective clothing in an unsteady thermal state [J]. Journal of Textile Research, 2020, 41(01): 139-144.
[3] LI Sihu, SHEN Min, BAI Cong, CHEN Liang. Influence of structure parameter of auxiliary nozzle in air-jet loom on characteristics of flow field [J]. Journal of Textile Research, 2019, 40(11): 161-167.
[4] CHEN Xu, WU Bingyang, FAN Ying, YANG Musheng. Numerical simulation of low temperature protection process for heat storage fabrics [J]. Journal of Textile Research, 2019, 40(07): 163-168.
[5] DENG Qianqian, YANG Ruihua, XU Yaya, GAO Weidong. Study on mixing uniformity of fibers in rotor-spun mixed yarns [J]. Journal of Textile Research, 2019, 40(07): 31-37.
[6] ZHENG Zhenrong, ZHI Wei, HAN Chenchen, ZHAO Xiaoming, PEI Xiaoyuan. Numerical simulation of heat transfer of carbon fiber fabric under impact of heat flux [J]. Journal of Textile Research, 2019, 40(06): 38-43.
[7] CAO Haijian, CHEN Hongxia, HUANG Xiaomei. Numerical simulation of side compressive properties on glass fiber/epoxy resin sandwich composite [J]. Journal of Textile Research, 2019, 40(05): 59-63.
[8] GUO Zhen, LI Xinrong, BU Zhaoning, YUAN Longchao. Three-dimensional numerical simulation of fiber movement in nozzle of murata vortex spinning [J]. Journal of Textile Research, 2019, 40(05): 131-135.
[9] GUANG Shaobo, JIN Yuzhen, ZHU Xiaochen. Analysis on airflow field in extended nozzle of air jet loom [J]. Journal of Textile Research, 2019, 40(04): 135-139.
[10] LIU Qiannan, ZHANG Han, LIU Xinjin, SU Xuzhong. Simulation on tensile mechanical properties of three-elementary weave woven fabrics based on ABAQUS [J]. Journal of Textile Research, 2019, 40(04): 44-50.
[11] SHANG Shanshan, YU Chongwen, YANG Jianping, QIAN Xixi. Numerical simulation of airflow field in vortex spinning process [J]. Journal of Textile Research, 2019, 40(03): 160-167.
[12] LIN Huiting, AKANKWASA Nicholus Tayari, ZHANG Yuze, SHI Qianqian, WANG Jun. Effect of bypass channel on rotor-spun yarn properties in rotor spinning [J]. Journal of Textile Research, 2019, 40(02): 153-158.
[13] SHI Qianqian, AKANKWASA Nicholus Tayari, LIN Huiting, ZHANG Yuze, WANG Jun. Comparative analysis of rotor spinning machines and yarn performance between conventional and dual-feed rotor spinning [J]. Journal of Textile Research, 2019, 40(02): 63-68.
[14] . Numerical simulation for twisting chamber of air jet vortex spinning based on hollow spindle with spiral guiding grooves [J]. Journal of Textile Research, 2018, 39(09): 139-145.
[15] . Comprehensive performance of auxiliary nozzle of air-jet loom based on Fluent [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(08): 124-129.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!