Journal of Textile Research ›› 2020, Vol. 41 ›› Issue (05): 50-57.doi: 10.13475/j.fzxb.20190506508

• Textile Engineering • Previous Articles     Next Articles

Study on actuating force of knit actuator based on covered yarn with shape memory alloy wire as core

XIONG Xiangzhang1, PEI Zeguang1,2(), CHEN Ge1,2   

  1. 1. College of Mechanical Engineering, Donghua University, Shanghai 201620, China
    2. Engineering Research Center of Advanced Textile Machinery, Ministry of Education, Donghua University, Shanghai 201620, China
  • Received:2019-05-24 Revised:2020-02-18 Online:2020-05-15 Published:2020-06-02
  • Contact: PEI Zeguang E-mail:zgpei@dhu.edu.cn

RichHTML

10

PDF (PC)

132

Abstract:

To fabricate fabric-based artificial muscle for soft robotic applications, a covered yarn with NiTi shape memory alloy (SMA) wire as the core and aramid multi-filaments as the sheath was designed in this research. Plain knittes fabric-based actuators were fabricated from the covered yarn, which can be driven by Joule heat. Effects of the structural parameters and actuation conditions on the actuation performance of the knit actuators as well as their cyclic actuation characteristics were investigated. The results show that upon actuation, the plain knittes fabric-based actuator exhibits bending deformation along its wale direction. With the increase of number of rows of the knit actuator, its actuating force along the wale direction in the fabric plane increases linearly, while its actuating force in the direction perpendicular to the fabric plane demonstrates a slight decrease. The increase of the loop size leeds to the increased actuating force along the wale direction in the fabric plane. The rise of the actuating current resultes in an increase of the actuating forces in both directions. The knit actuator exhibites a stable and high-frequency cyclic actuating capability.

Key words: shape memory alloy wire, covered yarn, knit, actuator, fabric-based artificial muscle

CLC Number: 

  • TB333

Tab.1

Parameters of NiTi shape memory alloy wire"

密度/
(g·cm-3)		 比热/
(J·g-1·℃-1)		 导热率/
(W·cm-1·℃-1)		 泊松
比		 每米电阻值/
(Ω·m-1)
6.45 0.84 0.18 0.33 55

Tab.2

Parameters of Kevlar aramid multi-filaments"

线密度/
dtex		 纤维根
数		 断裂
强力/N		 比强力/
(cN·dtex-1)		 拉伸模量/
(cN·dtex-1)		 断裂
伸长率/%
220 135 51 23.0 700 3.1

Fig.1

Fabrication process of covered yarn with SMA wire as the core. (a) First wrap;(b) Second wrap"

Fig.2

Knit actuator with 3 columns and 26 row. (a) Initial state top view;(a) Initial state side view;(c) Actuating state top view;(c) Actuating state side view"

Fig.3

Schematic diagrams of experimental measurement principle. (a) Schematic diagram of measuring method for F1; (b) Schematic diagram of measuring method for F2"

Fig.4

Actuating forces of knit actuator with different number of columns. (a) Change rule of F1 with different number of columns; (b) Change rule of F2 with different number of columns"

Tab.3

Structural parameter values of knit actuators knitted by different needles"

棒针
直径/
mm		 长度/
mm		 宽度/
mm		 纵行方向
线圈密度/
(线圈·mm-1)		 横列方向
线圈密度/
(线圈·mm-1)
2.00 49.52 8.28 0.53 0.36
2.25 52.88 9.48 0.49 0.32
2.50 57.16 10.10 0.45 0.30
2.75 61.14 10.82 0.43 0.28
3.00 64.10 11.62 0.41 0.26
3.25 67.92 12.36 0.38 0.24

Fig.5

Actuating forces of knit actuators knitted by different diameter needles in process of actuation for a single cycle. (a) Output characteristics of F1;(b) Output characteristics of F2"

Fig.6

Actuating force of knit actuator driven by different current in process of actuation for a single cycle. (a) Output characteristics of F1; (b) Output characteristics of F2"

Fig.7

Actuating forces of knit actuator under different cooling time in process of cyclic actuation. (a) Cooling time of 20 s;(b) Cooling time of 15 s; (c) Cooling time of 10 s"

[1] HU W, LUM G Z, MASTRANGELI M, et al. Small-scale soft-bodied robot with multimodal locomotion[J]. Nature, 2018,554(7690):81-85.
doi: 10.1038/nature25443 pmid: 29364873
[2] CHEN W, XIONG C, LIU C, et al. Fabrication and dynamic modeling of bidirectional bending soft actuator integrated with optical waveguide curvature sensor[J]. Soft Robotics, 2019,6(4):495-506.
doi: 10.1089/soro.2018.0061 pmid: 30907704
[3] HINES L, PETERSEN K, LUM G Z, et al. Soft actuators for small-scale robotics[J]. Advanced Materials, 2017,29(13):40-43.
[4] ZHAO G, SUN Z, GUO H, et al. Combination mechanism investigation on the muscle-like linear actuator using ionic polymer metal composites[J]. Polymer Composites, 2017,38(3):479-488.
doi: 10.1002/pc.v38.3
[5] SHINTAKE J, CACUCCIOLO V, SHEA H, et al. Soft biomimetic fish robot made of dielectric elastomer actuators[J]. Soft Robotics, 2018,5(4):466-474.
doi: 10.1089/soro.2017.0062 pmid: 29957131
[6] VOIT W, WARE T, DASARI R R, et al. High-strain shape-memory polymers[J]. Advanced Functional Materials, 2010,20(1):162-171.
doi: 10.1002/adfm.v20:1
[7] JIN H, DONG E, ALICI G, et al. A starfish robot based on soft and smart modular structure (SMS) actuated by SMA wires[J]. Bioinspiration & Biomimetics, 2016,11(5):10-12.
[8] ELAHINIA M H. Shape memory alloy actuators: design, fabrication, and experimental evaluation[M]. Chichester:John Wiley & Sons Ltd, 2016: 1-14.
[9] KIM H J, SONG S H, AHN S H. A turtle-like swimming robot using a smart soft composite (SSC) structure[J]. Smart Materials and Structures, 2012,22(1):7-14.
[10] WANG W, LEE J-Y, RODRIGUE H, et al. Locomotion of inchworm-inspired robot made of smart soft compo-site (SSC)[J]. Bioinspiration & Biomimetics, 2014,9(4):40-46.
[11] HUANG X, KUMAR K, JAWED M K, et al. Highly dynamic shape memory alloy actuator for fast moving soft robots[J]. Advanced Materials Technologies, 2019. DOI: 10.1002/admt.201800540.
doi: 10.1002/admt.201600121 pmid: 31341947
[12] ABEL J, LUNTZ J, BREI D. Hierarchical architecture of active knits[J]. Smart Materials and Structures, 2013,22(12):47-51.
[13] HAN M W, AHN S H. Blooming knit flowers: loop-linked soft morphing structures for soft robotics[J]. Advanced Materials, 2017,29(13):51-58.
[14] YOSHIMURA G, IWAKI N, SHINTAKU S, et al. Mechanical properties of covered yarn[J]. Journal of the Textile Machinery Society of Japan, 1970,16(3):77-87.
doi: 10.4188/jte1955.16.77
[15] LEXCELLENT C. Shape-memory alloys handbook[M]. Hoboken:John Wiley & Sons Inc, 2013: 3-12.
[16] SPENCER D J. Knitting technology: a comprehensive handbook and practical guide[M]. Cambridge: Woodhead Publishing Ltd, 2001: 1-6.
[17] 龙海如. 针织学[M]. 北京: 中国纺织出版社, 2008: 1-10.
LONG Hairu. Knitting science[M]. Beijing: China Textile & Apparel Press, 2008: 1-10.
[1] YANG Ping, YAN Biao, MA Pibo. Research advances in manufacture and properties of mesh fabrics [J]. Journal of Textile Research, 2021, 42(01): 175-180.
[2] GUO Weidong, XIA Fenglin, ZHANG Qi. Influencing factors on high speed of electronic shogging system in warp knitting machines [J]. Journal of Textile Research, 2021, 42(01): 162-166.
[3] ZHAO Boyu, LIANG Xinhua, CONG Honglian. Structural modeling and process practice of three-dimensional fully fashioned face masks woven by computerized flat knitting machine [J]. Journal of Textile Research, 2020, 41(12): 59-65.
[4] DAI Ning, PENG Laihu, HU Xudong, CUI Ying, ZHONG Yaosen, WANG Yuefeng. Natural frequency characterization based on Euler-Bernoulli beam theory on knitting seamless underwear [J]. Journal of Textile Research, 2020, 41(12): 144-150.
[5] DAI Ning, PENG Laihu, HU Xudong, CUI Ying, ZHONG Yaosen, WANG Yuefeng. Method for testing natural frequency of weft knitting needles in free state [J]. Journal of Textile Research, 2020, 41(11): 150-155.
[6] LI Xintong, GAO Zhe, GU Hongyang, CONG Honglian. Study on stiffness style of knitted suit fabrics [J]. Journal of Textile Research, 2020, 41(11): 53-58.
[7] SUN Cenwenjie, NI Jun, ZHANG Zhaohua, DONG Wanting. Ventilation design and thermal-wet comfort evaluation of knitted sportswear [J]. Journal of Textile Research, 2020, 41(11): 122-127.
[8] XU Yanhua, YUAN Xinlin. Pattern forming method of flat-knitted socks with section-dyed yarn [J]. Journal of Textile Research, 2020, 41(10): 52-57.
[9] LI Dongdong, ZHANG Chengjun, ZUO Xiaoyan, ZHANG Chi, LI Hongjun, ZHOU Xiangyang. Study on magnetic field distribution in permanent magnetic needle drive using hybrid magnetic suspension needle [J]. Journal of Textile Research, 2020, 41(09): 136-142.
[10] CHEN Xi, MIAO Xuhong, NIU Li, HAN Xiaoxue, JIANG Gaoming. Sleeve-body connection technique for segmentation design of whole-garment flat-sleeve sweaters [J]. Journal of Textile Research, 2020, 41(09): 76-80.
[11] CHEN Jiaying, TIAN Xu, PENG Jingjing, FANG Tong, GAO Weihong. Fabrication of structural colors for knitted fabrics [J]. Journal of Textile Research, 2020, 41(07): 117-121.
[12] LIU Bo, CONG Honglian. Research and implementation of flat-bed knitting process model of fully formed suit [J]. Journal of Textile Research, 2020, 41(07): 53-58.
[13] WANG Songsong, PENG Laihu, HU Xudong. Knitting machine information modeling under OPC unified architecture framework [J]. Journal of Textile Research, 2020, 41(05): 167-175.
[14] WEI Tengxiang, LI Min, PENG Hongyun, FU Shaohai. Relationship between open-width mercerization condition and loop structure of weft plain-knitted cotton fabrics [J]. Journal of Textile Research, 2020, 41(04): 98-105.
[15] LIU Bo, CONG Honglian. Process design and knitting principle of one-piece casual suits based on four-needle-bed flat knitting machine [J]. Journal of Textile Research, 2020, 41(04): 129-134.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
京ICP备14006648号
Copyright 2021 © Editorial office of Journal of Textile Research
Supported by Beijing Magtech Co.Ltd