纺织学报 ›› 2020, Vol. 41 ›› Issue (12): 59-65.doi: 10.13475/j.fzxb.20200505507

• 纺织工程 • 上一篇    下一篇

电脑横机编织三维全成形口罩结构建模与工艺实践

赵博宇, 梁鑫花, 丛洪莲()   

  1. 江南大学 针织技术教育部工程研究中心, 江苏 无锡 214122
  • 收稿日期:2020-05-27 修回日期:2020-09-14 出版日期:2020-12-15 发布日期:2020-12-23
  • 通讯作者: 丛洪莲
  • 作者简介:赵博宇(1996—),女,硕士生。主要研究方向为全成形针织产品设计与智能针织产品的开发。
  • 基金资助:
    省部共建开放课题资助项目(M2-201805)

Structural modeling and process practice of three-dimensional fully fashioned face masks woven by computerized flat knitting machine

ZHAO Boyu, LIANG Xinhua, CONG Honglian()   

  1. Engineering Research Center for Knitting Technology, Ministry of Education, Jiangnan University, Wuxi, Jiangsu 214122, China
  • Received:2020-05-27 Revised:2020-09-14 Online:2020-12-15 Published:2020-12-23
  • Contact: CONG Honglian

RichHTML

11

PDF (PC)

127

摘要：

为探究用电脑横编机开发全成形针织产品的可能性,以针织三维全成形口罩为开发对象,进行结构建模与工艺实践。首先对人体面部尺寸进行测量,以此确定全成形口罩的二维纸样;然后结合全成形口罩规格尺寸进行工艺计算,以四针床电脑横编机和SDS-ONE APEX3系统为开发工具,分别建立针织三维全成形口罩的口罩主体、过滤垫片口袋开口、挂耳带部位的结构模型。结果表明:通过对口罩的规格设计并建立结构模型,同时结合工艺参数的调节并优化其生产技术,可实现兼具美观性与舒适性三维全成形口罩的快速生产,结合功能性原料可开发高附加值的口罩产品。

关键词: 针织, 全成形口罩, 四针床电脑横机, 结构模型, 针织工艺

Abstract:

In order to explore deeply the possibility of computerized flat knitting machines for creating fully fashioned knitted products, a knitted three-dimensional(3-D) fully fashioned face mask was chosen as the development object for structural modeling and process practicing in this research. The face size was firstly measured to determine the two-dimensional pattern for the mask. Then the process calculation was carried out based on the mask specifications, the four-needle bed computerized flat knitting machine and the SDS-ONE APEX3 system were set up and used as development tools to establish the structural model of the knitting mask body, pocket opening for filter gasket, and ear belts of the mask. Results show that the rapid production of 3-D fully fashioned masks with both aesthetics and comfort are achieved by establishing the structural model for the specified design of the mask, and by combining the adjustment of the process parameters to optimize its production technology. In addition, high value-added mask products could be effectively developed when using functional raw materials.

Key words: knitting, fully fashioned face mask, four-needle bed computerized flat knitting machine, structural model, knitting process

中图分类号: 

  • TS184.5

图1

面部尺寸测量示意图"

图2

全成形口罩整体结构图"

图3

口罩基础结构模型"

图4

口罩主体形状设计"

图5

口罩网孔设计及集圈组织编织图"

图6

侧边口袋设计和编织图"

图7

C型编织原理"

图8

挂耳带形状设计图"

图9

内部加针编织图"

图10

牵拉装置"

图11

成品口罩示意图"

[1] 罗璇, 彭佳佳, 蒋高明, 等. 全成形毛衫样板设计及成形方法[J]. 纺织学报, 2018,39(7):105-110.
LUO Xuan, PENG Jiajia, JIANG Gaoming, et al. Design and knitting shaping method of fully-fashioned knitwear[J]. Journal of Textile Research, 2018,39(7):105-110.
[2] 王盼, 吴志明. 横编全成形袜子工艺设计与编织原理[J]. 纺织学报, 2019,40(7):44-50.
WANG Pan, WU Zhiming. Process design and knitting principle of whole socks on flat knitting machine[J]. Journal of Textile Research, 2019,40(7):44-50.
[3] 王盼, 吴志明. 全成形毛衫横向编织方式及其成形工艺[J]. 纺织学报, 2019,40(10):73-78.
WANG Pan, WU Zhiming. Transverse knitting method and forming process of fully formed sweater[J]. Journal of Textile Research, 2019,40(10):73-78.
[4] 傅雯雯. 全成型针织防滑手套[D]. 上海: 东华大学, 2019: 1-4.
FU Wenwen. Seamless non-slip knitted gloves[D]. Shanghai: Donghua University, 2019: 1-4.
[5] 张雪艳, 王忠旭, 李玉珍, 等. KN95颗粒物防护口罩适合性与头面部尺寸关系研究[J]. 中国安全生产科学技术, 2015(2):154-159.
ZHANG Xueyan, WANG Zhongxu, LI Yuzhen, et al. Study on relationship between fitness of KN95 particulate respirators and facial dimensions[J]. Journal of Safety Science and Technology, 2015(2):154-159.
[6] 刘博, 丛洪莲. 四针床全成形休闲西服的工艺设计与成形原理[J]. 纺织学报, 2020,41(4):129-134.
LIU Bo, CONG Honglian. Process design and knitting principle of one-piece casual suits based on four-needle-bed flat knitting machine[J]. Journal of Textile Research, 2020,41(4):129-134.
[7] 王盼, 吴志明. 全成形毛衫局部编织原理及其应用[J]. 纺织学报, 2019,40(5):41-46.
WANG Pan, WU Zhiming. Principle and application of partial knitting on fully formed sweater[J]. Journal of Textile Research, 2019,40(5):41-46.
[8] 王群. 三维全成形产业用针织物的编织工艺与性能研究[D]. 上海: 东华大学, 2016: 28-30.
WANG Qun. Investigation on knitting technology and properties of three-dimensional fashioned technical knitted fabric[D]. Shanghai: Donghua University, 2016: 28-30.
[9] 杨秀, 凌群民, 张良晓, 等. 数学模型在毛衫工艺计算中的应用[J]. 针织工业, 2017(6):18-21.
YANG Xiu, LING Qunmin, ZHANG Liangxiao, et al. Application of mathematical model in sweater technology calculation[J]. Knitting Industries, 2017(6):18-21.
[10] 李珂, 吴志明. 基于收针工艺的全成形毛衫分割线设计原理[J]. 纺织学报, 2019,40(6):85-90.
LI Ke, WU Zhiming. Design principle of secant line for whole garment sweater based on narrowing process[J]. Journal of Textile Research, 2019,40(6):85-90.
[11] 刘滨璐, 宁霞, 王嫱, 等. 浅谈FZ/T 73023—2006《抗菌针织品》测试标准[J]. 中国纤检, 2010(10):38-40.
LIU Binlu, NING Xia, WANG Qiang, et al. Discussion on microorganism and FZ/T 73023—2006 antibacterial knitwear[J]. China Fiber Inspection, 2010(10):38-40.
[12] 路丽莎, 蒋高明, 罗璇. 全成形毛衫腋下拼角编织工艺及性能[J]. 纺织学报, 2019,40(2):69-75.
LU Lisha, JIANG Gaoming, LUO Xuan. Knitting process and properties analysis of underarm stitching of fully-fashioned garment[J]. Journal of Textile Research, 2019,40(2):69-75.
[1] 杨萍, 严飙, 马丕波. 网状结构织物制备与应用研究进展[J]. 纺织学报, 2021, 42(01): 175-180.
[2] 戴宁, 彭来湖, 胡旭东, 崔英, 钟垚森, 王越峰. 纬编针织机织针自由状态下固有频率测试方法[J]. 纺织学报, 2020, 41(11): 150-155.
[3] 李新彤, 高哲, 顾洪阳, 丛洪莲. 针织西服面料的挺括风格研究[J]. 纺织学报, 2020, 41(11): 53-58.
[4] 孙岑文捷, 倪军, 张昭华, 董婉婷. 针织运动服的通风设计与热湿舒适性评价[J]. 纺织学报, 2020, 41(11): 122-127.
[5] 李冬冬, 张成俊, 左小艳, 张弛, 李红军, 周向阳. 混合磁悬浮织针驱动的永磁织针磁场分布规律[J]. 纺织学报, 2020, 41(09): 136-142.
[6] 陈佳颖, 田旭, 彭晶晶, 方彤, 高伟洪. 针织物表面结构色的构建[J]. 纺织学报, 2020, 41(07): 117-121.
[7] 刘博, 丛洪莲. 全成形西服横向编织技术的工艺模型与实现[J]. 纺织学报, 2020, 41(07): 53-58.
[8] 汪松松, 彭来湖, 胡旭东. OPC 统一架构框架下的针织装备信息模型[J]. 纺织学报, 2020, 41(05): 167-175.
[9] 熊祥章, 裴泽光, 陈革. 基于形状记忆合金丝包覆纱的针织物致动器研究[J]. 纺织学报, 2020, 41(05): 50-57.
[10] 尉腾祥, 李敏, 彭虹云, 付少海. 纬平针棉针织物平幅丝光条件与其线圈结构的关系[J]. 纺织学报, 2020, 41(04): 98-105.
[11] 刘博, 丛洪莲. 四针床全成形休闲西服的工艺设计与成形原理[J]. 纺织学报, 2020, 41(04): 129-134.
[12] 张佳慧, 王建萍. 圆形纬编针织物电极导电性能及电阻理论模型构建[J]. 纺织学报, 2020, 41(03): 56-61.
[13] 汪松松, 彭来湖, 戴宁, 沈春娅, 胡旭东. 基于工业互联网的针织机械互联互通结构研究 [J]. 纺织学报, 2020, 41(01): 165-173.
[14] 王小艳, 杜金梅, 彭铃淇, 荆丽丽, 许长海. 涤纶针织物碱减量和染色一浴一步法工艺 [J]. 纺织学报, 2020, 41(01): 80-87.
[15] 戴宁, 胡旭东, 彭来湖. 针织大圆机运动实时控制技术[J]. 纺织学报, 2019, 40(12): 134-139.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
京ICP备14006648号　 京公网安备11010502044800号
版权所有 © 2021 《纺织学报》编辑部
地址： 北京市朝阳区延静里中街3号主楼6层《纺织学报》杂志社　邮政编码：100025　
电话：010-65017711,65917740　传真：010-65016539　Email:fangzhixuebao@vip.126.com
本系统由北京玛格泰克科技发展有限公司设计开发